Protective Roof Coatings
Advanced coating systems designed to restore, protect, and extend the life of your existing roof.
A protective roof coating is a seamless, reflective membrane applied directly over an eligible existing roof. It adds 7–15 years of service life, can lower cooling bills 10–30%, and typically costs 30–60% less than a full tear-off replacement. Best fit: low-slope commercial, metal, and aging-but-intact residential roofs.
Key Takeaways
- Reflective white coatings reflect 70–85% of solar radiation, dramatically lowering attic load.
- Seamless application seals cracks, seams, and flashing without a tear-off.
- Multiple chemistries — elastomeric, silicone, acrylic, polyurethane — each with a specific use case.
- Saturated insulation or failing decking disqualifies a roof from coating — we inspect first.
- NanoShield is our specialty system; we use it where it's the right fit.
Extend the Life of Your Roof
In Houston's brutal summer heat, roofs degrade quickly. Thermal shock and UV radiation break down materials. The right coating acts as a shield — reflecting sunlight, sealing seams, and providing a seamless, water-resistant barrier over your existing flat or low-slope roof.
Coating Systems We Apply
Different roofs call for different chemistry. Here are the main systems we work with:
- Elastomeric coatings — flexible, seamless membranes ideal for aging flat and low-slope commercial roofs.
- Silicone coatings — excellent ponding-water resistance for flat roofs that don't drain perfectly.
- Acrylic coatings — cost-effective, highly reflective option for sound roofs that need UV protection.
- Polyurethane coatings — abrasion-resistant choice for roofs that see foot traffic.
- Reflective "cool roof" white coatings — designed to lower surface temperatures and help reduce cooling costs.
- NanoShield protective coating — our specialty system, covered in detail below.
NanoShield: Where We Go Deep
We can apply many different coatings, but NanoShield is the system we've built deep expertise around. It's an advanced coating technology that performs across a wider range of surfaces and conditions than most traditional roof coatings — which is why we've used it on everything from commercial roofs to brewery tanks to structural steel. When NanoShield is the right fit for your roof, we'll tell you. When it isn't, we'll recommend the system that is.
The NanoShield Advantage
When applied correctly to an eligible roof, NanoShield is engineered to:
- Reflect UV Rays: White, highly reflective coatings may help lower surface temperatures and reduce cooling costs.
- Seal Leaks: The thick, elastomeric properties bridge small cracks and form a seamless membrane.
- Prevent Rust: Excellent for preserving aging metal roofs.
- Offer a Cost-Effective Alternative: A coating application is often significantly less expensive and disruptive than a full roof tear-off.
Recent NanoShield Projects
Most of our NanoShield work is on roofs — commercial flat roofs, low-slope systems, and aging metal roofs that aren't ready for a full tear-off. The same coating technology also performs well on industrial assets like boilers, tanks, and structural steel, so we've included a few of those examples too. Every project starts with a surface evaluation to confirm the coating is the right fit.
Explore selected coating work and project details on the projects page.
Is Your Roof a Candidate?
Not every roof can be coated. If the underlying insulation is saturated or the structural decking is failing, a coating will trap moisture and cause further damage. Our expert technicians perform a rigorous inspection to determine if your roof is a viable candidate for restoration via coating.
Find Out if a Coating is Right for You
Request an evaluation in Houston, Sugar Land, Katy, Spring, The Woodlands, or Conroe.
Call (832) 408-8500